GRAPHENE GLASS

NanoSwiss™

Nano Protector Waterproofing.

Oil Phobic.

Anti Stain for Glasses and Mirror.

Authentic nanotechnology in compliance with Law 696/2011 EU.

Protects building and automotive glass.

Suitable for windows, glass doors, partitions and glass fences.

Protects glass against acid rain and minerals.

Easy to clean Glass.

SUITABLE FOR USE ON:

Building Facade.

Photovoltaic Panel.

Elevator Mirrors.

Shower stall.

Windshield.

Oven Glasses.

Induction Cooker.

Cups.

Crystals.

Plates.

APPLICATION AREAS:

Residential.

Building.

Industrial.

Automotive.

Nautic.

Before applying NanoSwiss GRAPHENE GLASS, the protector, your glass must be clean and free of stains. If there are stains, they can be removed with the stainless steel and glass stain using NanoSwiss REMOVE. Easy to apply and safe, ph neutral.

LONGEVITY:

From 5 to 10 years.

BENEFITS:

Retains the natural surface color and finish.

Treated surfaces are easier to maintain.

Prevents Biofilm Build Up.

Easy to clean.

Keeps Windows Clean for Longer.

Gives your glass a long lasting new look.

HOW DOES NANOTECNOLOGY WORK?

Nano Graphene particles deeply penetrate the surface of countertop correcting imperfections that are invisible to the naked eye. These corrected imperfections create an efficient and long lasting effect or “Lotus Effect”.

Resin protection. Graphene Protection.

The Nano particles in contact with the surface of the countertop produce a tension on the surface of the stone providing a pearl hydrophobic effect.

CARACHTERISTICS:

Suitable for contact with foods.

Invisible. Nano particles of oxide graphene are 100 thousand times smaller than the thickness of print paper, allowing it to deeply penetrate the smallest stone pores of your countertops. This is the next generation of protection for your countertop surfaces.

Next generation sealer, optimized for all natural and engineered types of stones.

Easy single coat application.

Easy to apply.

Will not flake, yellow, crack or blister.

Highly effective, economical product.

Easy to clean. Reduced cleaning time.

Greatly reduces the use of detergents and water for cleaning.

Prevents the formation of molds.

Improves Good Sanitation Practices.

Biosafety. Smooth surface makes attachment of pathogens difficult.

Pearl effect, which shows how the product Works and allows the removal of water with a blow of air.

European Common Community Manufacturing Seal. Made in Europe.

Touch cure time of 1 minute and 8 hours full cure.

Does not need polishing.

Does not contain: fluorine carbon, resin or silicon.

Invisible treatment with natural finish.

Easy and quick application using microfiber cloth applying to surface in a criss-cross pattern by hand.

European Common Community Manufacturing Seal. Made in UE.

PROPERTIES:

Synthetic graphene, less than 0.01 nanometer (X

Does not form film. Penetrates the substrate. Nano Impregnator.

Does not alter the stone´s appearance, maintaining its natural shine.

Does not change the color of the stones.

Heat proof resistant up to 280 degrees Celcius.

Resistant to UV (Ultra Violet) and IR (Infra Red).

Resistant to conventional cleaning products.

PRESENTATIONS:

02.03.001000 – NanoSwiss™ Glass – 1 liter.

02.03.000140 – NanoSwiss™ Glass – 140 ml.

02.03.000063 – NanoSwiss™ Glass – 63 ml.

02.03.000019 – NanoSwiss™ Glass – 19 ml.

YEALD TABLE:

PRESENTATION	sqf2/liter	ml./sqf2	Coverege	Slabs
19 ml.	7,890	0.17	74 sqf2	1
63 ml.	7,890	0.17	160 sqf2	3
140 ml.	8,500	0.12	850 sqf2	16
1 liter.	8,500	0.12	8,520 sqf2	160

PERSONAL PROTECTION:

Work in a well-ventilated place, whenever possible, opening windows and doors, maintaining air circulation.

Eye/face protection: Wear face shield, goggles or face shield shielding conforming to EN 166 for protection from liquid splashes. Wash the eyes with water.

Skin protection: Handle with gloves. Gloves must be inspected before being used. Protect your hands with gloves category III (Directive 89/686/EEC and standard EN 374).

Respiratory protection:

1- In normal environments: wear a filter mask with combined filters AX (according to standard DIN EN) class 1, 2 or 3 according to threshold concentration limit during use (EN 14387 norm). If there are gases or vapours of a different nature and / or gases or vapours with particles (aerosols, fumes, mists, etc.), combined filters must be provided.

Before starting the work, carefully read item 08 in MSDS.